Safety guard for mill left side

Protective screen for milling machines - left side mounting

Advantages:

• Third generation of protective screens for universal milling machines "Made in EU"
• The arms with friction joints make it an exceptional protection, multiple and very mobile
• Thermoformed screen in impact and oil resistant material
• Equipped with n.2 NC contacts, positive contacts as described in EN 60947-5-1
• Protects the user from direct contact with rotating parts of the vertical spindle and chips, and splashes of lubricant and coolant

Suitable for:

• Milling work with frequent changes of position
• Turret milling machines, universal milling machines

Delivered with:

• CE marking
• CE certificate
• Assembly and use instructions

Attachment on the side of the base, fully transparent widescreen, with double opening mechanism: 1 = the screen can open horizontally on its axis - 2 = floating out of the workspace. Complete with double microswitch. The screens are available separately.

Note: Specify the side of the edit by adding the following suffixes: / DX = right - SX = left.

Caution: Such a protective screen always requires an adaptation for mounting on your milling machine. Effective protection must be installed by qualified personnel. The required working time is approximately 3 hours, provided there is an emergency shutdown circuit. For questions or installation, contact our technical department.

Tip: When choosing a protection screen, you need to consider the type of milling machine, and depending on which side of the screen you want to install, you must choose between a left and right version. Although these screens are installed most of the time on universal milling machines with vertical spindle. Ensure the safety of the user.