Fully equipped lathes for mechanics. Impressive precision and performance.
Capacities:
• Center height: 205 mm
• Distance between centers: 1000 mm
• Spindle hole: 52 mm
Advantages :
• Spindle hole of ø 52 mm, camlock spindle 5
• With powerful two-speed engine 1.5 / 2.4 kW
• Closed coolant system with cooling pump
• Removable bed bridge for turning larger diameters
• LED machine lighting
• Sheet steel frame with storage space and chip collector
Suitable for:
• Flat turning, longitudinal and transverse turning, parting off, cone turning and thread cutting
• Home worker, garages for turning off drums, training centers and schools, general maintenance, R&D department
Characteristics:
• Hardened and grinded z-axis guideway
• Guaranteed concentricity of spindle nose better than 0.015 mm
• Electrical components from Siemens or Schneider
• All guides through keys after adjustable.
• High and precise finishing degree
• Gears and shafts tempered and ground, running in oil bath on precision bearings
Safeties.
• Separate emergency stop, separate start and stop button
• low voltage 24 V control buttons
• Microswitches in gearbox and chuck plate shield
• Splash wall and chip tray
• large chisel shield with LED lighting
• foot operated emergency stop brake
Supplied as standard with:
• Reduction sleeve MT6 - MT3
• 2 dead centers MT3
• Fixed steady with a passage of max. 100 mm
• Travelling steady with a passage of max. 95 mm
• 4-way tool holder
• Interchangeable wheels set
• Control keys
| Order number |
713402070
|
|
|---|---|---|
| Main data | ||
| Orig. nr. | TH4010 400V | |
| Electric connection | ||
| Voltage | V | 3x400 |
| Power motor | kW | 1.5/2.4 |
| Power coolant pump motor | W | 40 |
| Capacity | ||
| Center height | mm | 205 |
| Distance between centers | mm | 1000 |
| Swing over bed | mm | 410 |
| Swing over carriage | mm | 255 |
| Swing in gap | mm | 540 |
| Gap length | mm | 165 |
| Bed width | mm | 206 |
| Head | ||
| Number of speeds | 16 | |
| Spindle speed | min-1 | 45-1800 |
| Spindle cone | MC | 6 |
| Spindle nose Camlock DIN55029 | D1-5" | |
| Spindle hole | mm | 52 |
| Threads and feeds | ||
| Longitunidal feed | mm/rev | 0.043-0653 (48 pcs) |
| Transversal feed | mm/O | 0.015-0.206 (48 pcs) |
| Metric threads | M | 0.4-7 (42 pcs) |
| Inch threads | Gg/1" | 70-4 (42 pcs) |
| Carriage | ||
| Travel tool post slide | mm | 100 |
| Travel cross slide | mm | 195 |
| Tool changer height | mm | 16x16 |
| Tailstock | ||
| Tailstock cone | MC | 3 |
| Tailstock travel | mm | 130 (ø45) |
| Weight | kg | 735,00 |
| Dimensions (b x d x h) | mm | 1.920x740x1.222 |
| Price | € | 10.080,00 |
| Stock |
|
|
not in stock
limited stock
on stock
