Semi-automatic band saw - variable - ø 460 mm

Semi-automatic band saw BMBS460x600 HA-DG with double miter -60° to +60° and frequency inverter 20-100 m/min.

Advantages:

• Saw guide with hard metal plates
• Double miter -60° to +60°
• Semi-automatic version:
      - Closing machine vise
      - Lowering of the saw
      - Sawing
      - Rasing of the saw after cut
      - Opening of the machine vise
• With frequency converter for variable cutting speeds of 20 - 100 m/min
• Saw blade protection
• European quality

Suitable for:

• Industry, maintenance workshops, steel construction, schools and training centers, every metal workshop that wants just that little bit more

Characteristics:

• With hydraulically controlled sawing functions
• Ball bearing turntable
• Large dimensioned gearbox with helicoidal gears
• Extremely robust substructure
• Closed cooling system with direct cooling on the saw blade
• Machine clamp can be moved from left to right
• Mechanical saw blade tension with built-in switch to tighten the saw correctly
• The clamping jaws can move over the entire cutting area
• The two-piece machine clamp, the material is clamped both before and after the cut.
• BRP saw breakage protection: BRP system is activated when the maximum pre-installed value of amperes is exceeded by the motor. The saw blade stops the power supply while the band saw continues to rotate and thus removes the excess chips in the cutting line. When the load on the band saw was reduced to a minimum, the normal sawing process starts.
• STOP function - the cutting cycle can be interrupted at any time by pressing a switch, the saw continues to run, while the arm moves out of the cutting line.
• With saw brush for cleaning excess chips.

Safeties:

• Lockable main switch
• Separate emergency stop, separate start and stop button
• Motor protection
• Low voltage operation 24V

Delivered with:

• M42 saw blade 5380x41x1.3
• Material stop
• Cooling pump
• Service keys
• English manual, inscriptions, CE mark, and CE certificate according to Machine Directive 2006/42/CE and EMC directive 2014/30/CE

HA stands for semi-automatic execution
DG stands for double miter